Internet Protocol version 6

  • By Khatib Samir
  • February 27, 2023
  • CCNA
Internet Protocol version 6

Internet Protocol version 6

Internet Protocol version 6, is the successor to IPv4, the most widely used protocol for routing and delivering data packets on the internet. IPv6 was developed to address the limitations of IPv4, such as the limited number of available addresses and the lack of security features. One of the most significant differences between IPv4 and IPv6 is the size of the address space. IPv4 uses 32-bit addresses, which provides a total of approximately 4.3 billion addresses. IPv6, on the other hand, uses 128-bit addresses, providing a total of 3.4 x 10^38 addresses, effectively eliminating the need for address conservation techniques such as Network Address Translation (NAT).

 

For Free, Demo classes Call:  020-71173071
Registration Link: Click Here!

 

Another significant difference between IPv4 and IPv6 is the structure of the address itself. IPv4 addresses are divided into four octets, or 8-bit segments, separated by periods. IPv6 addresses, on the other hand, are represented as eight 16-bit blocks, separated by colons. This structure makes IPv6 addresses longer and more complex than IPv4 addresses but also allows for more efficient routing and easier aggregation of addresses.

Looking to boost your IT career and become a certified networking professional? Look no further than the SevenMentor CCNA course in Pune!

CCNA, or Cisco Certified Network Associate, is a globally recognized certification that validates your knowledge and skills in networking fundamentals, IP connectivity, network security, automation, and more. With a CCNA certification, you can open doors to exciting job opportunities in various industries and earn a higher salary.

IPv6 also includes several new features that are not present in IPv4, such as built-in security features, such as IPSec, and support for mobile IP, which allows devices to change their IP address while remaining connected to the network.

The adoption of IPv6 has been gradual, as it requires upgrading both hardware and software. However, as IPv4 addresses become increasingly scarce, and the need for more addresses and improved security features grows, more and more networks are transitioning to IPv6.

IPv6 is the successor of IPv4, the most widely used protocol for routing and delivering data packets on the internet. IPv6 was developed to address the limitations of IPv4, such as the limited number of available addresses and the lack of security features.

Internet Protocol version 6

Example Of Internet Protocol Version 6

2001:0000:0001:0002:1111:1122:1133:1144

 

 

For Free, Demo classes Call:  020-71173071
Registration Link: Click Here!

 

There are several types of IPv6 addresses, each with a specific purpose and format:

  1. Unicast addresses: These are unique addresses that identify a single interface on a device. They are used for one-to-one communication between devices.
  2. Multicast addresses: These addresses identify a group of interfaces, allowing for one-to-many communication. They are used for applications such as video streaming and online gaming.
  3. Anycast addresses: These addresses identify a group of interfaces, but packets sent to an anycast address are delivered to the nearest interface in the group. They are used for load balancing and failover.
  4. Link-local addresses: These addresses are used for communication within a single network segment, such as a LAN. They are used for automatic address configuration and for communication between devices that have not yet been assigned a global address.

Link-local Can be identified by FE80::

  1. Site-local addresses: These addresses are used for communication within a single site or organization. They are similar to private IPv4 addresses and are not globally unique.
  2. Unique local addresses (ULA): These addresses are similar to site-local addresses but are globally unique. They are intended for use in private networks and are not reachable from the global Internet.

Unique Local Can Be identified by FD00::

  1. Global addresses: These are globally unique addresses that are reachable from the Internet. They are used for communication between devices on different networks.

Global IP can be identified by range 2000:: to 3FFF::(all F)

 IPv6 addresses can be classified into different types based on their usage and scope, such as Unicast, Multicast, Anycast, Link-local, Site-local, Unique local addresses (ULA), and Global addresses. Each type of address serves a specific purpose and is used in different scenarios.

 

In IPv6, multicast addresses are used to identify a group of interfaces that belong to a specific multicast group. This allows for one-to-many communication, where a single packet can be sent to multiple destinations at once. Multicast addresses are identified by the prefix “FF00::/8” in the first octet.
Do you want to enhance your knowledge and skills in networking fundamentals? Look no further than CCNA training in Pune!

In IPv6, multicast addresses have different scopes, which determine the range of the multicast group. The scope of a multicast address is indicated by the 4th hextet of the address, also known as the Flags field. 

 

For Free, Demo classes Call:  020-71173071
Registration Link: Click Here!

 

Multicast Addresses in Internet Protocol Version 6

  1. Interface-local scope: These addresses are used for communication within a single network segment, such as a LAN. They are identified by the value “1” in the Flags field. FF01::
  2. Link-local scope: These addresses are used for communication between devices on the same link, such as a switch or router. They are identified by the value “2” in the Flags field.  FF02::
  3. Realm-local scope: These addresses are used for communication within a single routing domain, such as a single organization or network operator. They are identified by the value “3” in the Flags field. FF03::
  4. Admin-local scope: These addresses are used for communication within a single administrative domain, such as a single company or government agency. They are identified by the value “4” in the Flags field. FF04::
  5. Site-local scope: These addresses are used for communication within a single site, such as a single building or campus. They are identified by the value “5” in the Flags field. FF05::
  6. Organization-local scope: These addresses are used for communication within a single organization, such as a single company or government agency. They are identified by the value “8” in the Flags field. FF08::
  7. Global scope: These addresses are used for communication between devices on different networks. They are identified by the value “E” in the Flags field. FF0E::

Multicast addresses in IPv6 are used to identify a group of interfaces that belong to a specific multicast group, allowing for one-to-many communication. The scope of a multicast address determines the range of the multicast group, it can be interface-local, link-local, realm-local, admin-local, site-local, organization-local, or global. Each type of multicast address serves a specific purpose and is used in different scenarios.

 

Author:

Khatib Samir

SevenMentor Pvt Ltd

Call the Trainer and Book your free demo Class for CCNA now!!!

© Copyright 2021 | SevenMentor Pvt Ltd.

Submit Comment

Your email address will not be published. Required fields are marked *

*
*